Recording To A Cassette Tape - Sharp XL-35W Operation Manual

Recording to a cassette tape

XL-35W
Before recording:
! When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
! The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or
CrO tapes.
Erase-prevention tabs of cassette tapes:
! When recording on a cassette tape, make
sure that the erase-prevention tabs are not
removed. Cassettes have removable tabs
that prevent accidental recording or erasing.
! To protect the recorded sound, remove the
tab after recording. Cover the tab hole with
the adhesive tape to record on the tape with-
out the tab.
21
" Recording from a CD
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD STOP" appears on
the display.
When operating with the remote control, press the CD button.
3
Load the desired disc.
4
Load a cassette into the cassette compartment with the
Side A
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Tab for Tab for
5
side B side A Press the
Recording will be paused.
6
Press the
! CD playback will start in a few seconds after the tape starts.
! When the playback of the disc is finished, the CD and the
cassette will stop automatically.
02/11/22
button.
( ) button.
XL_35W_SCA_3.fm