Adjust The Image; Register Your Projector - Epson PowerLite 410W Quick Setup Manual

6

Adjust the image

1
To adjust the image position, stand
behind the projector, then press
the foot release lever and lift the
front of the projector. Release the
lever to lock the foot in position.
2
Rotate the focus ring to sharpen the image.
Focus ring
3
To enlarge the image, press the Wide button, or press the Tele button
to reduce it.
4
If your image looks like
is facing the screen squarely. Then, if necessary, press the
buttons on the projector's control panel until the image is corrected.
5
To select the best color mode, press the Color Mode button on the
remote control repeatedly to move through the options.
See your User's Guide on the CD-ROM for more information about
image adjustments.
7
Install your manuals and

register your projector

1
Insert the PowerLite projector CD-ROM in your drive. If the installer
doesn't open automatically, double-click the Epson CD-ROM icon,
then double-click the Epson installer icon.
2
Choose your language, then follow the instructions on the screen
to register.
You can also register at www.epson.com/webreg.
NOTE
3
After you register the projector, click User's Guide, EMP Monitor
Guide to install the manuals. (If you are using Windows
already have Adobe
on-screen instructions to install it.)
4
When you're done, click Exit.
To open a manual, double-click the PL 410W User's Guide or EMP Monitor
Operation Guide icon on your desktop.
Color Mode
button
® Reader,
or , first make sure the projector
® click Adobe Reader and follow the
or
® and you don't