Plug In And Turn On; Turning Off The Projector - Epson PowerLite 410W Quick Setup Manual

5

Plug in and turn on

1
Remove the lens cover.
2
Connect the power cord to
the projector and plug
the other end into an
electrical outlet.
The
projector turns orange.
3
Turn on your computer or
video source.
4
Press the
or remote control. The projector beeps,
the power light flashes green, and the
projector lamp comes on in about 5 seconds.
5
Start your video or presentation. If you have connected more
than one video source, use the Source Search button on the
projector or remote control to select the one you want to watch.
I f your image does not appear on the screen, see the
NOTE
Troubleshooting section for help.

Turning off the projector

1
If you're using a computer, shut it down first, while you can
still see the display.
2
Press the
3
When you see the confirmation message, press the
button again. The projector beeps twice and the
light turns orange.
With Epson's Instant Off
period. When you're done, just unplug the projector and it's
ready to travel.
power light on the
Power button on the projector
Power button on the projector or remote control.
®
technology, there's no cool-down
Power
power