Arming; Disarming; Emergency Override; Valet Mode - Scytek electronic Precision Blue Product Manual

Cell Phone with Blue Tooth
All ScyTek systems with Cnet capability combined with Precision Blue will arm and disarm the Alarm

Arming

To Arm the System:
The system arms itself automatically, each time the ignition is turned off and the Cell Phone is
out of range.
To start the Arming Process:
1. Turn off the ignition.
2. Open the door and exit the vehicle.
Once the cell phone is out of range, the LED will begin flashing rapidly.
3. After 10 seconds.
· The horn will honk.
· The doors will lock.
· The status LED will begin flashing.
4. The system is now armed.
Once Armed, the alarm will trigger when any of the following occurs:
·
The ignition is turned to On position.
When the alarm triggers, the horn will honk for 30 seconds.

Disarming

To Disarm the System:
The system disarms itself automatically, when the Cell Phone within range
· The Horn will Honk twice.
· The doors will unlock.
· The LED will turn off.

Emergency Override

If the Cellphone becomes lost or inoperable, the system can still be disarmed using the following
procedure. Before beginning this procedure be sure to have the ignition key ready and know the
location of the override switch.
To Emergency Override the system:
1. Unlock the door using the key.
2. Enter the vehicle.
3. Turn the ignition key on.The system will trigger and the horn will sound.
4. Press and hold the override switch until the system disarms.
5. The vehicle will now be able to start.
Precision Blue - Page 1