Using Additional Components; Connecting External Video Devices - Epson Home Cinema System Installation Manual

Using Additional Components

You can connect up to a total of five external video devices to the Ensemble HD system, such as a cable box or
satellite receiver (see "Connecting External Video Devices" below). You can also use the following types of
components:
• Additional subwoofer to expand the bass presence in extra-large rooms (see page 68)
• Antenna to receive AM/FM radio broadcasts (see page 69)
• Third-party universal remote control (see page 71)
See the User's Guide for instructions on connecting an audio component, such as a tape deck.

Connecting External Video Devices

Connect the video cable from your device to any available port on the back of the AV controller, as shown
below:
S-video port
Caution
Avoid connecting or disconnecting any components with your equipment turned on.
Component CVBS (composite
video port video) port
63
HDMI audio/video ports