Input Signal - Epson dreamio EMP-TW200 User Manual

Startup Screen
This sets whether the start-up screen (the image that is projected when projection starts)
is displayed (ON) or not displayed (OFF).
If you change the setting, the new setting will take effect after the power has been turned
off and the cool-down period is complete.

Input Signal

Video Signal
(Adjustment is only possible when composite video
input)
This sets the video signal format. If "Auto" is selected, the video signal format is set
automatically. If there is a lot of interference in the image, or if a problem such as no
image being projected occurs even though "Auto" has been selected, select the correct
signal format.
Input A
Change this setting depending on the type of signal that is being output from the video
equipment that is connected to the [InputA] port.
D4
Select "YCbCr" or "YPbPr " depending on the type of signal that is being output by
the source that is connected to the [D4] port.
Language
This sets the display language for messages and menus.
Reset
This returns all settings in the "Setting" menu to their default settings, except for the "Input Signal" and
"Language" settings.
Configuration Menu Functions
or S-Video signals are being
ON
Default setting
Auto
YCbCr
YCbCr
Default setting
English
(Varies depending on
country of purchase)
21