Setting" Menu - Epson dreamio EMP-TW200 User Manual

Configuration Menu Functions

"Setting" menu

Advanced
Progressive
(Setting is only possible when 525i or 625i component video
•
OFF :IP conversion is carried out for each field in the screen. This is ideal for using
•
ON :Interlaced
Noise Reduction *
(Setting is only possible when composite video signals or S-Video signals are being
input.)
This suppresses interference in images and makes the images appear softer. If viewing
images with little or no interferences, such as images from DVDs, it is recommended
that you change this setting to "OFF".
Output Scaling *
This changes the display area (the part of images projected).
•
When component video , composite video
input
Normal (92% display) :Input signals are projected at the normal image size. TV
Larger (95% display) :The areas at the top, bottom and sides of images that cannot
•
When RGB-video or computer signals are being input
Normal (100% display) :Input signals are projected at the full image size.
Smaller (95% display) :The edges of the images are truncated when projected.
Setup Level *
(Setting is only possible when composite video signals or S-Video signals in NTSC
format are being input.)
If using products designed for destinations such as the United States or South Korea that
have different black level (setup level) settings, use this function to obtain correct
images. Check the specifications of the connected equipment when changing this
setting.
Screen
Position *
Use ,
18
1
*
when viewing images with a large amount of movement.
(i) signals are converted into progressive (p) signals. This is ideal
for using when viewing still images.
1
1
images are displayed at 92% size.
normally be seen are inserted and projected. Interference may
occur at the top or bottom of the images depending on the
image signal.
Select this option if there is interference at the top or bottom
of the images.
1
1
, and to move the display position for images.
*1 The setting values are stored separately for each image source and signal type.
signals are being input)
or S-Video signals are being
Default setting
OFF
OFF
Normal
Normal
0%
(Varies depending on
country of purchase)
Default setting