Regency ULTIMATE U37-NG1 Owners & Installation Manual page 3

INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE
®
This Regency product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards: ANSI Z21.88b-2003/CSA
2.33b-2003, and CAN/CGA-2.17-M91.
This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured Home Construction
and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home Installations, Sites, and Com-
munities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada.
This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes follow the current
National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the current CAN/CGA B149 Gas Installation
Code and the current Canadian Electrical Code CSA C22.1 in Canada.
®
This Regency Mobile/Manufactured
Home Listed appliance comes factory
equipped with a means to secure the
unit.
®
U37-1 Regency ULTIMATE Rear Vent Direct Vent Freestanding Gas Stove
®
This Regency Mobile/Manufactured
Home listed appliance comes equipped
with a dedicated #8 ground lug to which an
8 gauge copper wire from the steel chassis
ground must be attached.
3