Programme Search - JVC KW-NX7000 Instructions Manual

To change the PTY code for PTY Standby
Reception
1
2
3
Mode
Mono
SSM
PTy Standby
PTy Code
Back
4
Select your favourite PTY code.
Ex.: Selecting <Easy Listening>
Back
Mode
Mono
SSM
PTy Standby
PTy Code
Back
Exit
Start
News
Exit
Exit
Start
Easy Listening
Exit
66
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM RDS station of the same network, possibly
broadcasting the same programme with stronger
signals.
Programme A broadcasting on different frequency
areas (01 – 05)
When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting, see <AF Regional>. (☞ page 110)
• When the DAB tuner is connected, refer also to
"Tracing the same programme—Alternative
Frequency Reception (DAB AF)." (☞ page 98)
Automatic station selection—

Programme Search

Usually when you select preset stations, the preset
station is tuned in.
If the signals from the FM RDS preset station are not
sufficient for good reception, this unit, using the AF
data, tunes in to another station broadcasting the
same programme as the original preset station is
broadcasting. To activate this function, select <On> for
<Program Search>. (☞ page 110)
• The unit takes some time to tune in to another
station using programme search.
A