When Connected With The Interface Adapter - JVC KW-NX7000 Instructions Manual

When connected with the interface adapter

Sound mode
(☞ page 105)
Playback mode
(☞ page 101)
Preparation:
Make sure <iPod> is selected for <External Input>. (☞ page 111)
~
Press [SOURCE], then press [iPod].
Playback starts automatically.
• You can also use AV/OFF on the remote controller. Press it repeatedly.
Ÿ
4
Press [ ] or [
Selecting a track from the
player's menu
1
Press [SEARCH] to enter the player's menu.
"SEARCH" flashes on the screen during menu
operations.
• This mode will be canceled if no operations are
done for about 5 seconds.
2
Press [4] or [¢] to select the desired
item.
Press: Selects an item.
Hold: Skips 10 items at a time if there are more
than ten items.
Playlists Ô Artists Ô Albums Ô Songs Ô
Genres Ô Composers Ô (back to the beginning)
4 ¢
[ ] Press: Selects tracks
Hold: Reverse/forward search
[SEARCH] Enters player's menu
3 8
[ / ] Starts playback/pauses
☞
(
¢
] to select a track.
Track no./Playing time
page 58)
3
Press [3 / 8] to confirm the selection.
4
Repeat steps 2 and 3 to select a track.
• When a track is selected finally, playback starts.
• To return to the previous menu, press [SEARCH].
Selecting playback modes
Operations are exactly the same as explained on
page 101 for "USB iPod."
• <Audiobooks> is not displayed in step 3.
102