JVC KW-NX7000 Instructions Manual page 109

Menu items
Menu Language *
Audio Language *
2
Subtitle*
2
Monitor Type *
16:9
4:3PS
2
OSD Position *
Position 1
2
File Type *
DivX Regist. (Registration) *
2
iPod Artwork *
D. Audio Output *
2
* Selectable only for "DISC", "SD", and "USB." (Playback stops when you change the setting.)
Selectable settings, [reference page]
2
Select the initial disc menu language; Initial English (☞ also
page 121).
2
Select the initial audio language; Initial English (☞ also page 121).
Select the initial subtitle language or erase the subtitle (Off); Initial
English (☞ also page 121).
Select the monitor type to watch a wide screen picture on the external
monitor.
4:3LB
16:9 : Select when the aspect ratio of the external monitor is 16:9.
4:3LB (Letterbox)/4:3PS (Pan Scan): Select when the aspect ratio of
the external monitor is 4:3.
• Refer to the illustrations on the left to see how the pictures are
shown on the screen.
Select the position of the on-screen bar. ☞ [80]
Position 2 1: Higher position
2: Lower position
Select playback file type when a disc/SD/USB contains different types of files.
You can store this setting separately for each source —"DISC/SD/USB."
Audio: Plays back audio files.
Still Picture: Plays back JPEG files.
Video: Plays back DivX/MPEG1/MPEG2 files. (Not applicable to "SD")
Audio&Video: Plays back audio files and DivX/MPEG1/MPEG2 files.
(Not applicable to "SD")
2
This unit has its own Registration Code. Once you have played back a
file with which the Registration Code recorded, this unit's Registration
Code is overwritten for copyright protection.
Off: Cancels.
On: Activates artwork display. To display artwork, press DISP
repeatedly. ☞ [10]
• Refer also to page 119.
2
Select the signal format emitted through the DIGITAL OUT (optical)
terminal. (☞ also page 120)
PCM : Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital, DTS, or MPEG Audio, or when
connecting to a recording device.
Dolby D : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital.
Stream : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital, DTS, or MPEG Audio.
The procedure for setting an item is shown on page 16.
109
AV OPERATIONS