JVC KW-NX7000 Instructions Manual page 65

Activating/deactivating TA/PTY Standby Reception
TA Standby Reception
To activate, display <
of <Setup> menu in <AV Menu>
screen, then press [On] for <TA
Standby>. (☞ page 110)
The unit will temporarily switch to
Traffic Announcement (TA) if available,
from any source other than AM.
• The volume changes to the preset
TA volume level if the current level is
lower than the preset level (☞ page
110).
Not yet activated. Tune in to another
station providing the RDS signals.
To deactivate, press [Off] for <TA
Standby>. (☞ page 110)
By pressing Short Cut icon, you can activate
or deactivate TA Standby Reception.
Indicator
(Tuner)>
TP
Lights up
Flashes
Goes off
PTY Standby Reception
To activate, display <AV Menu>
screen, press [Mode], then press [On]
for <PTy Standby>. (☞ page 113)
The unit will temporarily switch to your
favourite PTY programme from any
source other than AM.
Not yet activated. Tune in to another
station providing the RDS signals.
To deactivate, press [Off] for <PTy
Standby>. (☞ page 113)
By pressing
or deactivate PTY Standby Reception.
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
searches for the services.
65
Indicator
PTY
Lights up
Flashes
Goes off
Short Cut icon, you can activate
AV OPERATIONS