JVC KW-NX7000 Instructions Manual page 47

How TMC information is reflected in navigation
If <Bypass Traffic> is set to <Manual>
(☞ page 50), [Reroute] appears on the screen when
the TMC service informs the System of traffic accidents
or congestion ahead on your route.
Recalculates the route
Shows the detail of the alert
Appears when you approach a traffic
event on your route.
• The rerouting may be canceled while you are
checking due to a change of traffic conditions. The
rerouting is also canceled if you do not confirm the
rerouting in one minute.
If <Bypass Traffic> is set to <Auto>, the System
automatically calculates a new route when TMC informs
the System of an obstacle on your route.
If <Bypass Traffic> is set to <Off>, the System
does not take TMC information into account when
calculating a route.
To confirm detailed information of a TMC
icon on a map
1
Ignores the traffic alert
2
47
Place the cursor on the TMC icon.
• If there are several POIs on the selected position,
select one from the list.
– The list appears only when <POI Icon> is set
to <On>. (☞ page 51)
POIs
• To return to the map, press [Exit].
NAVIGATION SYSTEM