Making Copies; Copy Options; Stop Copying; Changing Copy Quality - Brother MFC-J4310DW Advanced User's Manual

7

Making copies

Copy options

You can change the copy settings for the next
copy.
These settings are temporary. The machine
returns to its default settings one minute after
copying.
To change a setting, press Copy, Options
and then press s or t on the Touchpanel to
scroll through the copy settings. When the
setting you want is displayed, press it and
choose your preferred option.
When you are finished choosing settings,
press Black Start or Color Start.
NOTE
• You can save some of the options that you
use most often by setting them as the
default settings. These settings will
remain until you change them again. (See
Setting your changes as the new default
on page 51.)
• The Ink Save Mode,
Thin Paper Copy and Book Copy
features are supported by technology
from Reallusion, Inc.

Stop copying

To stop copying, press
42
7
7
.

Changing copy quality

You can choose the copy quality. The factory
setting is Normal.

Normal
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.
NOTE
If you choose Normal, you can only
choose Plain Paper in Paper Type.

Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Load your document.
b
Press (Copy).
c
Enter the number of copies you want.
d
Press Options.
e
Press s or t on the Touchpanel to
display Quality.
f
Press Quality.
g
Press Normal or Best.
h
Press OK.
i
If you do not want to change additional
settings, press Black Start or
Color Start.
7
7