Setting Your Changes As The New Default; Restoring All Settings To The Factory Settings - Brother MFC-J4310DW Advanced User's Manual

n
The Touchscreen shows:
Set the next page, then
press Scan. When you finish,
press Complete.
Place the next page on the scanner
glass and press Scan.
Press OK.
The machine starts printing.
o
If you pressed Sort for multiple copies,
repeat step n for each additional page.
After all the pages have been scanned,
press Complete.
The machine starts printing.
DO NOT touch the printed page until it is
ejected the second time. The machine will
print the first side and eject the paper, and
then pull the paper in to print the second side.
NOTE
If you get a paper jam, press Advanced
after step i, and then press one of the
jam prevention settings: 2-sided1 or
2-sided2.
2-sided1 uses a longer print time for the
ink to dry.
2-sided2 uses a longer print time and
will also print in lighter colors.
Setting your changes as the
new default
You can save the settings for the copy
options you use most often by setting them as
the default, such as Quality,
1
, Enlarge/Reduce,
Tray Select
Density, Page Layout, Ink Save Mode,
Thin Paper Copy, Remove Background
and 2-sided Copy.
These settings will remain until you change
them again.
1
MFC-J4610DW only.
a
Press (Copy).
b
Press Options.
c
Press s or t on the Touchpanel to
display the available settings, and then
press the setting you want to change.
Press s or t to display the available
options, and press the option you want
to set. Repeat this step for each setting
you want to change.
d
After changing the last setting, press
s or t to display Set New Default.
e
Press Set New Default.
f
Press OK.
The Touchscreen asks you again to
confirm that you want to set the changes
as the new default settings.
Press Yes.
g
Press .
Restoring all settings to the
factory settings
You can restore the copy settings that you
have changed to the factory settings, such as
Quality, Tray Select
Enlarge/Reduce, Density,
Page Layout, Ink Save Mode,
Thin Paper Copy, Remove Background
and 2-sided Copy.
7
1
MFC-J4610DW only.
a
Press
b
Press Options.
c
Press s or t on the Touchpanel to
display Factory Reset.
d
Press Factory Reset.
e
Press Yes.
f
Press .
Making copies
1
,
(Copy).
7
7
51