Additional Sending Operations; Sending A Fax Manually; Sending A Fax At The End Of A Conversation; Dual Access (Black & White Only) - Brother MFC-J4310DW Advanced User's Manual

Additional sending
operations

Sending a fax manually

Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
NOTE
(MFC-J4410DW and MFC-J4610DW)
To send a multi-page fax, use the ADF.
a
Load your document.
b
Press (Fax).
c
To listen for a dial tone, press Hook.
d
Dial the fax number.
e
When you hear the fax tones, press
Fax Start.
If you are using the scanner glass, press
Send on the Touchscreen to send the
fax.
Sending a fax at the end of a
conversation
3
At the end of a conversation, you can send a
fax to the other party before you both hang
3
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press Fax Start.
 If you are using the scanner glass,
press Send to send the fax.
d
Replace the handset of the external
phone.
Dual Access
(Black & White only)
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The Touchscreen shows
the new job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
NOTE
If the Out of Memory message
appears, press
the pages scanned so far.
Sending a fax
to cancel or OK to send
13
3
3
3