GeForce 9300/9400 ITX Series Motherboard
This item allows you to enable or disable the SATA controller.
This item allows you to set the SATA to SATA/RAID/AHCI mode.
This item will be effective only if the device is accessed through BIOS.
q IDE Detect Time Out
The item allows you to select the time out value for detecting ATA/ATAPI devices.
q ATA (PI) 80pin cable detection
The item allows you to select the mechanism for detecting 80pin ATA(PI) cable.
ACPI Configuration
The items in this menu allow you to set General ACPI configuration, Advanced ACPI
Configuration and Chipset ACPI Configuration.
APM Configuration
These items allow you to configure Advanced Power Management.
MPS Configuration
The items in this menu allow you to configure MPS.
PCI Express Configuration
The items in this menu allow you to enable or disable PCI Express L0S and L1 link
power states.
Smbios Configuration
SMBIOS SMI wrapper support for PnP Function 50h-54h.
USB Configuration
The items in this menu allow you to change the USB-related features. Press <enter>
To display the configuration options:
q Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
q USB 2.0 Controller Mode
Allows you to configure the USB 2.0 controller in HiSpeed or Full Speed .
q BIOS EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-off
feature.
q Legacy USB1.1 HC Support
Allows you to enable or disable Legacy USB1.1 HC support.
20