Ide Configuration; Floppy Configuration; Supper Io Configuration; Hardware Health Configuration - Zotac X58 User Manual

Intel X58 Motherboard
q Active Core Count
Use this option to active CPU core.

IDE Configuration

The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Press <enter>to display the configuration options:
q SATA#1 Configuration
The items allow you to configure SATA#1.
q Configuration SATA#1 as
The items allow you to set a type of SATA#1.
q SATA#2 Configuration
The items allow you to configure SATA#2.
q Primary, Second, Third and Fourth IDE Master/Slave
This displays the status of auto detection of IDE devices.
q Hard Disk Write Protect
This will be effective only if device is accessed through BIOS.
q IDE Detect Time Out
The items allow you to select the time out value for detecting ATA/ATAPI devices.
q ATA(PI) 80pin cable detection
The items allow you to select the mechanism for detecting 80pin ATA(PI) cable.

Floppy Configuration

The items in this menu allow you to set or change the configurations for the floppy
devices installed in the system.
Super IO Configuration
The items in this menu allow you to configure Win627DHG Super IO Chipset.

Hardware Health Configuration

This menu gives you an overview of the Hardware Health Configuration.

USB Configuration

The items in this menu allow you to change the USB-related features .Press <enter>
To display the configuration options:
q Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
q USB .0 Controller Mode
Allows you to configure the USB 2.0 controller in HiSpeed or Full Speed .
q BIOS EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-off
feature.
q Hotplug USB FDD Support
This option to support hot plug USB FDD.

ACPI Configuration

The items in this menu allow you to setting general APCI configuration.

AHCI Configuration

The items in this menu allow you to setting general AHCI configuration.

MPS Configuration

The items in this menu allow you to configure MPS.

PCI Express Configuration

The items in this menu allow you to enable or disable PCI Express L0S and L1 link
power states.
8