Table of Contents
Advertisement
q ACPI Sleep State
Select the highest ACPI sleep state, the system will enter when the SUSPEND
button is pressed.
q Lock Legacy Resources
This item allows you to enable or disable lock legacy resources.
q Deep Sleep (ErP Compliant)
When enabled, wake up from S4/S5 can only be done by power button.
q Restore on AC Power Loss
This item allows you to configure how the system board responds to a power
failure.
q Wake system with Fixed Time
Use this item to enable or disable wake system with fixed time.
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects. Press <enter>to display the configuration options:
q Limit CPUID Maximum
Allows you to determine whether to limit CPUID maximum value. Set this item
to [Disable] Windows XP operating system; set this item to [Enable] for legacy
operating system such as Windows NT4.0.
q C6 Mode
Use this item to enable or disable C6 mode.
q AMD PowerNow function
This item allows you to enable or disable AMD PowerNow!
q SVM
Use this item to enable or disable SVM mode.
q Node 0 Information
Enter this item to view memory information related to Node 0.
IDE/SATA Configuration
The items in this menu allow you to set or change the configurations for the IDE/SATA
devices installed in the system. Press <Enter> to display the configuration options:
q OnChip SATA Channel
Use this item to configure onchip SATA channel.
q OnChip SATA Type
Use this item to configure the SATA type.
q OnChip IDE mode
Use this item to configure onchip IDE mode.
q SATA IDE Combined Mode
This item allows you to enable or disable SATA IDE combined mode.
USB Configuration
The items in this menu allow you to change the USB-related features. Press <enter>
To display the configuration options:
q Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
Configuring the BIOS
function.
TM
23
Advertisement
Table of Contents
