Resistance Measurements - Craftsman 82312 Owner's Manual

RESISTANCE MEASUREMENTS
WARNING: To avoid electric shock, disconnect power to the
unit under test and discharge all capacitors before taking any
resistance measurements.
Set the function switch to
the highest _2 position.
2. Insert the black test lead
banana plug into the
negative COM jack.
3. Insert the red test lead
banana plug into the
positive £-2 jack.
4. Touch the test probe tips
across the circuit or part
under test. It is best to
disconnect one side of the
part under test so the rest
of the circuit will not
interfere with the resistance
reading.
5. Read the resistance in the
display. Move the function
switch to successively
lower £-2positions to obtain a higher resolution reading.
18