Battery Replacement - Craftsman 82312 Owner's Manual

',_-'_n n/d_I;_i'il;__I".,] if_,_ _I_v_ I_I_i
1. Disconnect the test leads from the meter.
2. Remove the protective rubber holster. See diagram.
3. Remove the Phillips head screw located on the lower
back of the instrument.
4. Remove the fuse/battery compartment cover to access
the battery. See diagram.
5. Replace the 9V battery observing polarity.
6. Secure the fuse/battery compartment cover using the
Phillips head screw.
7. Place the protective rubber holster on the meter.
4
6
1. Removable Rubber Holster
2. Meter
3. Battery
4. Fuses
5. Compartment Cover
6. Rubber Holster
22