Launching The Software From Windows - Epson PowerLite 7300 User Manual

Launching the Software from Windows

1. If you have Windows 3.x, double-click the ELP Link III program
2. Click the minimized program icon. The ELP Link III main dialog
icon in the Windows 3.x ELP Link III program group. If you have
Windows 95, 98, or NT, click Start, then select Programs,
ELP Link III, and then click the ELP Link3 program icon.
The ELP Link III program icon appears minimized at the bottom
of your screen, or on the taskbar if you're running Windows 95,
98 or NT.
Note: If you see a prompt asking you to select a port or open the
software with the projector disconnected, it may be because the
projector is disconnected or is connected to an incorrect COM port. If
you want to run the software without the projector connected, select
Unconnected and Execute. If it is connected, click Select a
port, and retry. Then select the COM port you're using on the next
screen.
box appears.
Launching the Software
95