Epson PowerLite 7300 User Manual page 36

28
1 • Setting Up the Projector
1. Connect the small end of the main cable to the projector's
Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are
connecting a second computer.)
2. To use the remote control as a wireless mouse, connect the 9-pin
end of the PS/2 mouse cable included with the projector to the
MOUSE terminal on the square end of the main cable.
3. Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable to the
external mouse port on your laptop.
Note: If your laptop uses a serial mouse, perform steps 2 and 3 using
the PC serial mouse cable instead of the PS/2 mouse cable (not shown
in the illustration).