Epson PowerLite 7300 User Manual page 89

Menu item Description
Contrast Adjusts the difference between light and dark areas. Increase the
contrast to make light areas lighter and dark areas darker. Decrease it
to minimize the difference between light and dark areas.
Color Adjusts the color balance of the input source.
Select this item and then press the right arrow button (control panel)
or press right on the pointer button (remote) to enter the color
adjustment mode. Then use the pointer button or up and down
buttons (control panel) to select a color.
Next, use the pointer button or left and right buttons (control panel) to
adjust the selected color. Increase the color setting for more intense
color on the screen, and lower the setting for less intense color.
When you finish making adjustments, press the Enter button (control
panel) or a multi-purpose button (remote) to return to the Video menu.
Auto Set Up When enabled, this item allows the projector to sense the computer
signal input and adjust it to the current projector settings. If the
projector doesn't automatically recognize the video source, try turning
this off and choosing your settings manually.
Reset Returns all menu items to their initial factory defaults.
Select this item and then press the right arrow button (control panel)
or right on the pointer button (remote) to display the confirmation
screen.
Select Yes and then press the Enter button (control panel) or a
multi-purpose button (remote) to reset the menu.
If you change your mind, select No and then press a multi-purpose
button (remote) or the Enter button to clear the confirmation screen
without changing any settings.
Video Menu (Image Source = Computer)
81