Connecting The Audio Cable - Epson PowerLite 7300 User Manual

Connecting the Audio Cable

48
1 • Setting Up the Projector
1. If you will be using audio, connect one end of the audio cable to
the Audio 1 jack on the projector. (Use the Audio 2 jack if you
are connecting a second computer.)
Audio 1 jack
2. Connect the other end of the audio cable to the audio-out port on
your PowerBook.
Note: After you turn on the projector and computer, you'll need to choose
Mirroring in the Display Control Panel if you set up your configuration to
display on the LCD screen as well as the projector screen.
audio cable