Craftsman evolv 320.17088 Operator's Manual page 14

can be used but nothing like alcohol, gasoline, or other such leaning agents.
Never use caustic agents to clean plastic parts.
WARNING: Always wear safety goggles or safety glasses with side shields
during power tool operations or when blowing dust. If operation is dusty, also
wear a dust mask.
WARNING: Keep the tool air vents unclogged and clean at all times.
WARNING: Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial solvents and may
be damaged by their use. Use a clean cloth to remove dirt, dust, oil, grease, etc.
,_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come in contact with plastic parts. Chemicals
can damage, weaken or destroy plastic which may result in serious personal
injury.
WARNING: Water must never come into the tool.
17088 Manual Revised 09-0728 Page 14