Specifications; On/Off Trigger Switch; Forward/Reverse Switch - Craftsman evolv 320.17088 Operator's Manual

work light. To secure your new rechargeable
screwdriver from possible failure, the battery
is in a low-charge condition when initially
shipped. Therefore, you should charge it
at for least 10 hours prior to use. Charging
your tool for at least 10 hours during the
first cycle of use will insure optimum battery
performance.
_, WARNING: Do not allow familiarity with
your screwdriver to make you careless.
Remember that a careless fraction of a
second is sufficient enough to inflict severe
injury.
Fig. 1
Power Unit
Charging
indicator
',_ +_ Charging Socket
\.II-_./
Power unit
Rechargeable battery
Normal charging time
Forward/Reverse rotation
LED Worklight
Collet size
PRODUCT SPECIFICATIONS
Input: 120V~60HZ
Output: 6V, DC 300mA
3xl .2=3.6V DC Ni-Cd
3-5 hours
YES
YES
1/4" hex Collet
WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual as well as knowledge of the
project you are attempting. Before use of this product, familiarize yourself with
all operating features and safety rules.
ON/OFF TRIGGER SWITCH
To turn the tool on, press the trigger switch. To turn the tool off, release the
trigger switch.
FORWARD/REVERSE SWITCH
The forward/reverse switch should only be operated when the motor is NOT
running.
SCREWDRIVER BiT COLLET
To hold 1" bits, bit holder, and socket adaptor.
WORK LIGHT
17088 Manual Revised 09-0728 Page 11