Battery Tool Use And Care; Safety Symbols For Your Tool - Craftsman evolv 320.17088 Operator's Manual

Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery;
avoid contact, if contact accidentally occurs, flush with water, if liquid
contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
SERVICE
• Have your power too[ serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
SAFETY SYMBOLS FOR YOUR TOOL
The label on your tool may include the following symbols.
V ............................................................... Volts
A ............................................................... Amps
Hz ............................................................. Hertz
W .............................................................. Watts
min ........................................................... Minutes
...... I..................................................... Alternating Current
I __-== ...I ..................................................... D rect Current
n............................................................. No-load Speed
[] .............................................................. Class II construction
.../min ....................................................... Revolutions or Strokes per minute
_, ........................................................... Indicates danger, warning caution.
It means attention! Your safety is
involved.
17088 Manual Revised 09-0728 Page 6