Removing Blade - Craftsman 315.108620 Operator's Manual

REMOVING BLADE
See Figure4_
m Unplugthe saw.
II Depressspindle lock button,
II Removeblade screw by turning it counterclockwise
with the wrench.
n Removespring washer and outer blade washer
("D _ washer),
= Lift lower blade guard.
III Removeblade_
ATTACHING DUST CHUTE ADAPTER AND DUST
NOZZLE
See Figure5,
NOTE: tf you use thedust nozzle,you should always
connect it to a standard vacuum hose.
m Unplug thesaw.
= Lift lower blade guard.
!1 Orient adapterto fit into the dust chute opening on
upper blade guard.
m Secureadapterwlth screw provided.
m Align hotein nozzlewi',_h raised lip on adapter and snap
into place.
m Attach standard vacuum hoseto nozzle.
NOZZLE
HOLE
Fig. 5
Fig, 4
12