Resetting The Lamp Timer - Epson MOVIEMATE 72 User Manual

6. Gently insert the new lamp and tighten its screws.
Caution: Don't touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
7. To replace the lamp cover, insert the tabs and then snap the cover into place. (Epson
MovieMate won't work if the lamp cover is loose.)
8. After replacing the lamp, you need to reset the lamp timer, as described in the next
section.

Resetting the Lamp Timer

1. Connect the power cable and press the
2. Press
3. Press
4. Press
50
Caring for Your Epson MovieMate
on the remote control. You see the Visual Setup menu.
to highlight , then press
Info
again. You see the following on the screen:
button to turn Epson MovieMate on.
to select it.