Viewing Status Information And Resetting The Lamp Timer - Epson MOVIEMATE 72 User Manual

You can adjust the following items:
■ Video Signal:
equipment. If no image appears or you see interference, select the appropriate signal.
■ Child Lock:
page 40 for more information.
■ High Altitude Mode:
altitude above 4900 feet (1500 meters), to ensure that Epson MovieMate does not
overheat.
4. Press
5. Press

Viewing Status Information and Resetting the Lamp Timer

You can use the Info page on the Visual Setup menu to view the number of hours the lamp
has been used, and to reset the timer after you install a new lamp. You can also view video
signal information and error codes for any problems that occur.
1. Press
2. Press
information.
Note: If the lamp has been used less than 10 hours, 0H is displayed.
3. To reset the lamp timer after replacing the lamp, press
4. Press
44
Doing More with Epson MovieMate
Normally, you can leave this set to
Turn this setting on to lock the
Turn this setting on if you use Epson MovieMate at an
or to adjust the setting.
to exit the menu.
on the remote control. You see the Visual Setup menu.
to highlight , then press
Info
to exit.
when using external
Auto
button on the control panel. See
to display the lamp usage and other
.