Playing Epson Moviemate Audio Through An External Audio System - Epson MOVIEMATE 72 User Manual

Playing Epson MovieMate Audio Through an
External Audio System
You can connect Epson MovieMate to an audio receiver, an amplifier, a 5.1 Stereo Surround
Sound System, or a digital audio recorder. To output sound from Epson MovieMate, the
external equipment needs to have an optical audio input port.
You will also need an optical digital cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1. Make sure the equipment is turned off, then connect the cable as shown:
2. Turn on your audio equipment and play your movie, music, or other presentation with
sound from Epson MovieMate.
3. You may need to change the
if you are connecting a DTS/Dolby Digital Decoder or
Stream
connecting to equipment that is only compliant with linear PCM. For more information,
see page 43.
You can also use any of Epson MovieMate's audio controls, as described on pages 18 and 21.
Optical digital cable
(not included)
Digital Output
Using Epson MovieMate with Other Equipment
setting in the Audio Setup Page. Select
PCM
if you are
29