Storing Epson Moviemate; Transporting Epson Moviemate - Epson MOVIEMATE 72 User Manual

5. Select and press
Yes
The lamp usage timer displays
10 hours.

Storing Epson MovieMate

Follow these guidelines when storing Epson MovieMate:
■
Make sure the temperature and humidity of the storage area are within the recommended
range for the projector: 14 to 140 °F (–10 to 60 °C) and 10 to 90% relative humidity
without condensation.
■
Make sure all discs are ejected.
■
Close the lens cover and retract the feet.
■
Remove the batteries from the remote control.
■
Package Epson MovieMate in its original packaging or equivalent (as described in the
following section).

Transporting Epson MovieMate

Note: Epson shall not be liable for any damages incurred during transportation.
Epson MovieMate contains many glass and precision parts. If you need to transport it, follow
these guidelines to prevent damage:
■
When shipping Epson MovieMate for repairs, use the original packaging material if
possible. If you do not have the original packaging, use equivalent materials, placing
plenty of cushioning around Epson MovieMate. Be sure the carrier is capable of
transporting fragile equipment and is aware that Epson MovieMate is fragile.
■
If you move Epson MovieMate from a cold environment into a warm room,
condensation (moisture) may form internally or on the lens surface. To avoid damage
that might be caused by condensation, wait approximately an hour before using Epson
MovieMate. If condensation forms, turn off the power, then wait an hour or two before
use.
to reset the timer.
(zero hours) until you've used the lamp for at least
0 H
Caring for Your Epson MovieMate
51