Aastra 6757I User Manual page 233

Configuring "Preferred Line" and "Preferred Line Timeout"
Using the Aastra Web UI
Aastra Web UI
Use the following procedure to configure the Preferred Line and Preferred Line Timeout feature
using the Aastra Web UI.
1. Click on Basic Settings->Preferences->General.
2. In the "Preferred Line" field, select a preferred line to switch focus to after incoming or
outgoing calls end on the phone. Default is 1. Valid values are:
•
•
For example, if you set the preferred line to "1", when a call (incoming or outgoing) ends on
the phone (on any line), the phone switches focus back to Line 1.
3. In the "Preferred Line Timeout" field, enter the amount of time, in seconds, that the phone
switches back to the preferred line after a call (incoming or outgoing) ends on the phone, or
after a duration of inactivity on an active line. Default is 0. Valid values are:
•
4. Click
Model 6757i IP Phone User Guide
Notes:
1. If you specify a value of "0" for the preferred line parameter, it
disables the preferred line focus feature.
2. If you specify a value of "0" for the preferred line timeout
parameter, the phone returns the line to the preferred line immediately.
None (disables the preferred line focus feature)
1 to 9
0 to 999
to save your changes.
225