Full One Year Warranty - Craftsman 351.214600 Operator's Manual

Warranty .................................... 2
Safety Rules ............................... 2-3
Unpacking .................................. 3
Assembly ................................... 3
Installation ................................. 4-5
Operation ................................. 5-g
Maintenance ................................. 9
Troubleshooting ............................. 11
Parts Illustrations and Lists .................. 12-15
EspaSol ................................. 16-24
FULL ONE YEAR WARRANTY
If this product fails due to a defect In material or work-
manship within one year from the date of purchase,
Sears will at Its option repair or replace It free of
charge. Contact your nearest Sears Service Center
(1-800-4-MY-HOME) to arrange for product repair, or
return this product to place of purchase for replacement.
If this product is used for commercial or rental purpos-
es, this warranty will apply for 90 days from the date of
purchase.
This warranty applies only while this product is used in
the United States.
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman
Estates, IL 60179
WARNING: For your own safety, read all of the
instructions and precautions before operating tool.
CAUTION: Always follow proper operating procedures
as defined in this manual -- even if you are familiar
with use of this or similar tools. Remember that being
careless for even a fraction of a second can result in
severe personal Injury.
BE PREPARED FOR JOB
• Wear proper apparel. Do not wear loose clothing,
gloves, neckties, rings, bracelets or other jewelry
which may get caught in moving parts of machine.
• Wear protective hair covering to contain long hair.
• Wear safety shoes with non-slip soles.
• WearsafetyglassescomplylngwlthUnitedStates
ANSI Z87.1. Everyday glasses have only impact
resistant lenses. They are NOT safety glasses.
• Wear face mask or dust mask If operation Is dusty.
© Sears, Roebuck and Co.
• Be alert and think clearly. Never operate power tools
when tired, intoxicated or when taking medications
that cause drowsiness,
PREPARE WORK AREA FOR JOB
• Keep work area clean.Cluttered work areas invite
accidents.
• Do not use power too]s tn da,"_jereus environments.
Do not use pewit tools th damp or wet IocetJonso Do
not expose power tools to rain.
• Work area should be properly lighted.
• Proper electricet receptacle shoutd be available for
tool. Three-prong plug should be plugged directly
into properly grounded, three-prong receptacle.
• Extension cords should have s grouedlng prong and
the three wires of the extension cord should be of
the correct gauge.
,, Keep visitors at a safe distance from work area.
• Keep children out of workplace. Make workshop
chiJdproof.Use padJesks, master switches or remove
switch keys to prevent any unintentional use of
power tools.
TOOL SHOULD BE MAINTAINED
• Always unplug tool prior to inspection.
• Consult manual for specific maintaining and adjust-
Ing procedures.
• Keep tool lubricated and clean for safest operation.
• Remove adjusting tools. Form habit of checking to
see that adjusting tools are removed before switch-
ing machine on.
• Keep ell parts in working order. Check to determine
that the guard or other parts wllJ operate properly
and perform their intended function.
• Check for damaged parts. Check for alignment of
moving parts, binding, breakage, mounting and any
other cond[t[on that may affect a tool's operation.
• A guard or other part that is damaged shou)d be
properly repaired or replaced. Do not perform
makeshift repairs. (Use parts list provided to order
replacement psrts.)
KNOW HOWTO USE TOOL
• Use right tool for job. Do not force tool or attachment
to do a job for which it was not designed.
• Disconnect tool when changing btade.
• Avoid accidental start-up. Make sure that the tool is
in the "off"position before plugging in.
• Do not force tool. It will work most effic)ently at the
rate for which it was designed.
• Keep hands away from moving parts and cutting
surfaces.
• Never leave tool runnin_Junattended. Turn the power
offand do not leave tool until it comes to a complete
stop.
• Do not overreach. Keep proper footing and balance.
2