2. Following the instructions on the label, rotate the knob until the
appears in the hole.
3. Close the cutter cover.
Cleaning the Optional MICR Mechanism
MICA cleaning method (Recommended)
Cleaningpoint
MICR head department
MICA system department
* Combine these 2 procedures, if you encounter frequent MICR reading errors.
The cleaning procedure
During in the self test mode
1) Confirm to set a roll paper and a ribbon cassette to make use a
printer mechanism properly.
Use cleaning sheet
Moistened Cleaning
sheet
Adhensive cleaning sheet
Frequency
6000 times or for one
month
6000 times or for one
month
Troubleshooting 3-7