Selecting The Print Density (Dip Switch 2-3/2-4) - Epson TM T70 Technical Reference Manual

Selecting the Print Density (DIP Switch 2-3/2-4)

Function
Low power consumption mode
Print density (Standard)
Print density (Darker than standard)
Print density (Dark)
• If the print density is set to "Darker than standard" or "Dark" level, printing speed may be
• The print density can be set with DIP switches (2-3/2-4) or the customized value. (See
36
SW 2-3
ON
OFF
ON
OFF
reduced.
"Setting the Memory Switches" on page
"Depends on the DIP switch settings." If the customized value is changed, the value set
with the customized value is enabled.
SW2-4
ON
OFF
OFF
ON
38.) The initial setting of the customized value is