Table of Contents
Advertisement
Transporting the Printer
If you need to transport your printer some distance, carefully
repack it using the original box and packing materials as
follows:
1. Open the printer cover and make sure that the print head is
capped in the far right position. If the print head is not
capped, turn on the printer to cap it. Then turn off the
printer.
Note:
Do not remove the ink cartridge when you transport the pin ter.
The cartridge may become unusable otherwise.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3.
Remove the paper from the paper feeder.
4.
Attach the protective material to the printer.
5.
Repack the printer and power cord and place them in the
original box.
6. Keep the printer flat in the box during transport.
7. If the print quality is poor after transport, clean the print
head. See "Cleaning the Print Head."
Troubleshooting
Most problems you may have with your printer have simple
solutions. Find your problem in this section and follow the
recommended steps. If you cannot solve your problem, contact
your dealer or a qualified service person for assistance.
Maintenance and Troubleshooting
3-5
Advertisement
Table of Contents
