Wordperfect 6.0 Or 5.1 For Ms-Dos - Epson STYLUS Stylus 400 User Manual

Microsoft Windows standard drivers use scalable TrueType"
fonts rather than the fonts built into the printer. Windows fonts
appear the same on the screen as they do in your printed
document. (This feature is called WYSIWYG, What You See Is
What You Get.) All programs that run under Windows can use
the Windows printer driver to print their files. Therefore, you
have access to the full range of TrueType fonts if you use the
Windows Stylus 400, Stylus 300, Stylus 800, AP-3250, or LQ-870
driver.
If you want to use the printer's internal fonts and the TrueType
fonts, contact Microsoft Windows Product Support.
WordPerfect ® 6.0 or 5.1 for MS-DOS ®
If your current version of WordPerfect does not support the
EPSON Stylus 400, contact WordPerfect for details on
obtaining the correct driver.
Until your Stylus 400 driver arrives, you may want to install
the driver for one of the printers listed below:
EPSON ActionPrinter" 3250
EPSON LQ-870
Note:
lf you choose the LQ-870 printer in WordPerfect, be sure to select
Sheet feeder Bin 1
If you have already installed WordPerfect for MS-DOS and you
want to add the WordPerfect Stylus 400 driver, follow the
instructions below:
Select
Type
in the
and (or press Shift F7).
File Print
(for
Select Printer).
Printer Setup
screen.
Setting Up Your Printer
1-19