Advertisement
_J
nsert hinge pinon bottom of doorsinto hole in bottomshelf.Press upperhinge pin in front brace, align hinge hole on top of
door, and releasehinge pin intodoor.
Hingepin
of door
m
IHIIII'IIII'IIII'IIIIIII1'1 II II
I
'
IIII1'11'1 III
II
IIIII
J
Connecteachof thewires from the mainburner electrodes,and sidebumerelectrodeinto the backof the ElectronicIgnition
Module.Total (5) connections.Connectthe two wires{(a)and(b)}from the switch wiringharness intothe back of the Electronic
Ignition Module.Total (2) connections,shown A.
Releasethe cap and nutfrom electronicignitionmodule.Attach electronicignitionmoduleto the cart rightside panel with
the nut, shownB. Insert AA battery into ignitionmodule,negative(-) end first. Then put on the cap,shown C.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown
as (a), (b). Do not untie the wires while attaching.
Wire
ut
Advertisement
