Advertisement
Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front. Secure using two 1/4-20x1Yz" screws, 7ram lock washers, and 7ram flat washers on each side.
1/4-20x1Y2" screw
Qty.4
7turn Lock washer
7rnrn flat washer
Qty.4
Qty.4
7rnrnflat
7rnrnlock
1/4-20xIVz"
washer
washer
screw
Inside of cart, insert rear tab of tank heat shield into left slot(#1) on top of lower back panel. Insert left grease tray rail into
slot(#2) beneath grease tray opening in upper back panel, shown A. Attach front of tank heat shield and left grease tray rail
brace(#4 and #5) with two #8x3/8" self-tapping screws, shown B. Insert right grease tray rail into slot(#3) and attach it
under front under front brace(#6) with one #8x3/8" self-tapping screws, shown NB.
...............
#8x3/8"self-tappingscrew
Qty.3
Note:someparts omitted
for clarityof illustration
20
Grease trayopening
Advertisement
