Place bottom shelf upside down. Insert Caster Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Caster Pin and
repeat for remaining casters. Make sure the two locking casters are secured at the rear and the non-locking
casters are secured at the front. After all 4 casters are secure, remove the Caster Pin and save for future
maintenance.
Nomlockcaster
Locking caster
Bottom shelf
i
Caster pin
Qty.1
Caster pin
Attach side panels to bottom shelf using
three 1/4-20x1/2" screws, 7mm lock
washers, and 7ram flat washers per panel.
IMPORTANT: Panel with large hole must
be on left side of bottom shelf.
Left side panel
(with largehole)
Make sure side panels
are pushed as far to the
rear of bottom sheff as
possible before fully
tightening screws.
1/4-20x1/2"screw
Oty.G
7ram lock washer
Qty.G
7mm fiat washer
Qty.G
1/4-20x1/2" screw
7ram lockwasher
7ram fiat washer
Right side panel
Magnets
13