Carrier 33CS420-01 Owner's Manual page 68

How _ Set and _set the UV L_ht
Run-Time Abrt
This counter keeps track of the number of days since the UV Light
counter has been reset. The UV Light icon will appear after the
number of days has been achieved, as shown in step #29 (below).
Setting the counter to zero in Step #29 will prevent the Service UV
Light icon from ever appearing.
MO0_ _ Press the MODE button. While holding
Note: Press the
MODE
the MODE, press the PROGRAM button momentarily
PROGRAM
(.J button to enter Setup screens.
to
move
through
the
setup screens. Press
and hold the MODE
button to move back-
PresstheMODEbuttonrepeatedly,, _- -
• • wares through the
MOOE until this setup screen appears, tup screens.
[ )IeSS iese_ tie coulter to i to I)( IIi;_' i i!i h
Press the MODE button repeatedly ,_
MOD_
until this setup screen appears. _.
-&
Adjust th....
berofday..........
O ....... _5'
n increments of 10 before uv _h
the UV Light icon appears
on the d splay 0 = off Press
(O- 1990 days) PROeRAM_
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds
Page 15.3