Carrier 33CS420-01 Owner's Manual page 36

Setting the Fan-O_;Time Delay
To increase cooling efficiency of your unit, the thermostat may be
programmed to continue running the fan after a call for cooling has
been satisfied. This delay may be set for 30, 60, or 90 seconds, If
the Fan Off Delay is set for zero seconds, the fan will not energize
after a call for cooling has been satisfied.
Press the MODE button. While holding
MODE
the MODE, press the PROGRAM Note: Press the MODE
button momentarily pROG_M button to enter Setup screens, to move through the
setup screens. Press
and hold the MODE
Press the MODE button repeatedly_ button to move back-
Meo_ untilthis setup screen appears, wards through the
setup screens.
' to 0, 30, 60, or 90
_econd_
Press
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Page 7.3