Changing The Default Settings - Epson Stylus Photo 785EPX Printer Basics Manual

If you want to select Photo
Paper or Photo Quality Ink
Jet paper, see page 22 for
instructions.
18
PhotoEnhance
Use this setting if your camera supports PRINT Image Matching.
If not, you can still use PhotoEnhance to print with optimized
contrast, saturation, and color balance.
Print without PRINT Image Matching and without
enhancement.

Changing the Default Settings

The printer comes with the following default settings for each print mode:
You can change the defaults to the settings you use most often.
1. Make the settings you want to use for one of the print modes.
2. Press the
Select Photo
The settings are saved as defaults, even if you turn off the printer.
3. Repeat steps 1 and 2 for each print mode.
To change back to the factory defaults, first select the print mode you
want to change, then press the
buttons at the same time.
and buttons at the same time.
Brightness
,
Select Photo Brightness
, and
Cancel