Removing Memory Cards - Epson Stylus Photo 785EPX Printer Basics Manual

Do not eject a card while
the processing light is
flashing, or you may lose
data on the card.
12
If you don't change the default settings, this is what will happen
whenever you insert a memory card:
PhotoStarter will copy your pictures to the Photos folder on your
desktop.
The pictures will be stored by date.
Film Factory will open automatically.
3. Change any of the settings you want, then click
the Confirmation window, click
You can go back and change settings at any time by opening PhotoStarter:
In Windows, click
PhotoStarter3.0
Settings menu and choose
On a Macintosh, double-click the
desktop. Open the Tools menu and choose

Removing Memory Cards

When you're finished printing from a memory card, make sure the
processing light is not flashing before you remove the card.
On a Macintosh, select the memory card icon on your desktop and drag it
to the Trash. If you remove the card without doing this, an error message
will remain on your screen until you reinsert the card.
Press the button to eject the card. Then pull the card out of the slot.
On a Macintosh, you need to drag the memory card icon to the trash
before you turn off the printer or disconnect the cable.
If you're using Windows 2000, you need to stop the card before you
turn off the printer or disconnect the cable. Click the
icon on the Windows taskbar and click
Hardware
PCMCIA Storage Device.
.
End
, point to
Start Programs
, and click
EPSON PhotoStarter3.0
Change Settings
PhotoStarter
. When you see
Next
,
EPSON
. Open the
.
icon on your
.
Change Settings
Eject
Stop EPSON