Using Filters - Epson Stylus Photo 785EPX Printer Basics Manual

Brightness level -2 (filter 7)
Brightness level -1 (filter 6)
Original photo
Brightness level 1 (filter 4)
Brightness level 2 (filter 5)
30
3. Press the button to make your pictures 1 level lighter (
displayed). Press the
lighter ( is displayed).
2
Press the button once or twice to make them 1 or 2 levels darker
( or is displayed).
-1 -2
4. Press the
Brightness
stops flashing, and your selected (or total) photo number
Brightness
is displayed again.
5. Press the large green

Using Filters

You can use filters to apply enhancements or special effects to individual
photos. Nine filter effects are available, as listed below. (Four of the filters
have the same effect as the brightness settings.) Filters work in all print
modes except Index, on all types of paper.
1. Select your Print Mode and other settings and select the photo(s) you
want to print.
2. Press and hold the
button until
Filter No
Copies menu.
3. In the Select Photo menu, use the
the picture that you want to print with a filter.
4. In the Copies menu, press the
you want to use:
black and white
1 :
sepia (brown tones)
2 :
high contrast
3 :
1 level brighter
4 :
2 levels brighter
5 :
If you want to apply the same filter to all the photos you're printing,
press and hold the
select Photo menu. Then skip to step 7.
5. Repeat steps 3 and 4 for all the pictures you want to print with filters.
6. Press the
Brightness
number disappears, but it remains in effect.
7. Press the large green
button again to make your pictures 2 levels
button again to save the setting. The word
button. Your photos are printed.
Print
Brightness
. flashes on the
button to select the number of
button to select the filter number
1 level darker
6 :
2 levels darker
7 :
more vivid
8 :
sharper
9 :
button again until
Brightness
button again to save your settings. The filter
button. Your photos are printed.
Print
is
1
appears on the
ALL