Adjusting The Print Position - Epson Stylus Photo 960 Basic Manual

Epson ink jet printer owner's manual
Hide thumbs Also See for Stylus Photo 960:
Table of Contents

Advertisement

4. Open the File menu and select
following:
Windows
5. Click
(Windows) or
OK
Note: After you print, handle the CD or DVD carefully to avoid smearing the ink.
Wait at least 24 hours before playing the disc or inserting it in a drive. Keep
printed discs away from moisture and direct sunlight.
When you're finished printing on CDs and DVDs, make sure you return the adjust
lever to the m position. Then remove the front sheet feeder by pulling it straight out.
Caution: Don't move the adjust lever during printing; this could damage your printer.

Adjusting the Print Position

If your printed images and text are not centered or positioned the way you want, you
may need to adjust the printing position. Use the blank cardboard check disk
included with your printer, or an extra CD. You can also use these steps to check the
position before you print on a CD or DVD:
1. Place the position check disk (or an extra CD) on the CD tray and insert it into
the printer, as described on page 47.
2. Start Print CD.
3. Follow the instructions on page 50 to make sure your EPSON Stylus Photo 960 is
selected, and the Paper Source is set to
4. Select
from the File menu, or click the
Print
, or click the
Print
Macintosh
(Macintosh).
Print
Manual
Printing on Roll Paper, CDs, DVDs, and Card Stock
button. You see the
Print
or
.
Manual Feed
button.
Print
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

C11c456021 - stylus photo 960 color inkjet printer

Table of Contents