Adjusting The Print Density - Epson Stylus Photo 960 Basic Manual

8. Make sure
Enter Values
the
Height (Top)
or
Right Space
9. Click to save the measurements to the Print CD program.
OK

Adjusting the Print Density

If ink smears on your printed CDs or DVDs, you may need to adjust the color
saturation or ink density. CDs from different manufacturers may absorb ink
differently, so you may need to adjust the density for each type of disc. Follow these
instructions to print a color saturation check pattern, and then make adjustments as
necessary.
1. Start EPSON Print CD.
2. Follow the instructions on page 50 to make sure your EPSON Stylus Photo 960 is
selected, and the Paper Source is set to
3. Insert a test CD or DVD for printing, as described on page 47.
4. Select from the File menu, or click the
Print
following:
Windows
5. Select
Print Density Confirmation Pattern
(Macintosh), and click
Pattern
6. After the pattern is printed, examine the printed CD or DVD and make the Color
Correction setting lighter or darker as necessary.
or
Value Entry
or box. Enter the B distance in the
Top Space
box.
Select this setting
.
OK
Printing on Roll Paper, CDs, DVDs, and Card Stock
is checked, then input the A distance in
or
Manual Manual Feed
Print button. You see the
Macintosh
(Windows) or
Width (Right)
.
Print Density Check
53