Advertisement
Available languages
Available languages
1.
Connect the high pressure hose (E)
to the machine outlet (K). Ensure
the threads
are aligned properly
and the connection is secure.
4.
Turn incoming water on and fully
open
valve to insure
maximum
water flow to machine.
O
2.
Connect the garden hose (Y) to the
connector
(D) on the front of the
machine.
Before
connecting,
run
water through the garden hose (not
supplied) to flush out any foreign
matter.
NOTE: If your water source is a
well, the garden hose length can
only be 30 ft. maximum.
5.
Plug GFCI (C) into power receptacle.
Firmly press and release the TEST
button (Z), then press and release
the RESET button (Y). The light on
the GFCI should be illuminated.
3.
Insert the spray lance (B, R) into
the gun (A) by pushing firmly and
simultaneously
twisting a 1/4 of a
turn counterclockwise
until locked
into place.
@
Z_ WARNING:
If the
lance is not
securely
locked
into place,
it could
be ejected under high pressure during
operation,
possibly
causing
injury or
damage.
6.
Ensure the gun safety is unlocked
and squeeze the trigger until the air
has escaped and a steady flow of
low pressure water is coming from
the nozzle.
7.
12- ENG
Turn switch to ON position (I). Note
that
the motor
will momentarily
start then stop.
O
Advertisement
